Adjustment Features
and Instructions
NUOVA
CONTESSA
SEAT HEIGHT ADJUSTMENT BACK TILT ADJUSTMENT
RIGHT
Seat height can be adjusted by
lifting the lever at the front of
the right armrest. When this
lever is lifted, the weight of
the body will cause the seat to
lower, and releasing it stops
the seat at the desired height.
Lifting the lever with no weight
on the seat allows it to rise.
When the chair back is at the
desired angle, press the lever once
to lock it in position. Pressing the
lever again frees the chair back.
LEFT
To adjust the width of the 4D arms,
rab the arm pad on both sides and
push to the left or to the right to
the desired position.
Simultaneously pivot the arm pad inward
or outward to the desired angle. Arm pad
depth can be controlled by grabbing the
pad and sliding it forward or backward.
To adjust the arm height,
press the button below
either arm rest to raise
or lower it to the desired
position.
4D ARM-WIDTH, DEPTH, PIVOT AND HEIGHT ADJUSTMENT
To Next Page
Need help?
General
