Teknion NUOVA CONTESSA Adjustment Features & Instructions

nuova contessa adjustment features &
instructions
SEAT HEIGHT ADJUSTMENT BACK TILT ADJUSTMENT
4D ARM-WIDTH, DEPTH, PIVOT AND HEIGHT ADJUSTMENT
BACK TENSION ADJUSTMENT SEAT DEPTH ADJUSTMENT
Lifting the slide levers under both
sides of the seat allows it to be
adjusted forwards and backwards.
To adjust the width of the 4D arms,
grab the arm pad on both sides and
push to the left or to the right to the
desired position.
Simultaneously pivot the arm pad
inward or outward to the desired
angle. Arm pad depth can be
controlled by grabbing the pad and
sliding it forward or backward.
Back tilt adjustment
RIGHT
When the chair back is at the
desired angle, press the lever once
to lock it in position. Pressing the
lever again frees the chair back.
LEFT
Seat height can be adjusted by
lifting the lever at the front of
the right armrest. When this lever
is lifted, the weight of the body
will cause the seat to lower, and
releasing it stops the seat at the
desired height. Lifting the lever
with no weight on the seat allows
it to rise.
Back tilt adjustment
RIGHT
Turning the grip found under
the left side of the seat limits
the back tilt travel and locks
the back. Travel is limited on 3
positions with back lock in the
upright position.
To adjust the arm height, press
the button below either arm
rest to raise or lower it to the
desired position.
Back tilt adjustment
RIGHT
Back tilt adjustment
RIGHT
Back tilt adjustment
RIGHT
Back tilt adjustment
RIGHT
Back tilt adjustment
RIGHT
Back tilt adjustment
RIGHT
Back tilt adjustment
RIGHT
Back tilt adjustment
RIGHT

Teknion NUOVA CONTESSA Specifications

General

Category	Indoor Furnishing
Product Line	NUOVA CONTESSA
Manufacturer	Teknion
Weight Capacity	300 lbs
Type	Office Chair
Materials	Aluminum, Mesh, Fabric
Finish Options	Various upholstery and frame finishes available
Dimensions	Varies by configuration
Warranty	12 years