Tekno Point Multisplit air conditioner - Remote Control Usage Details; Battery Installation Guide; Operating the Unit with Remote

22
4. REMOTE CONTROLLER DESCRIPTION
4.1. Description of functions of remote controller keys
1) ON/OFF key to turn the air conditioner on and off.
2) ADJUSTING keys to adjust ambient temperature and the timer: "+" increasing, "-"
decreasing.
3) MODE key to select the operating mode: AUTO - COOL- DRY - FAN - HEAT:
4) FAN key to set the fan speed in the sequence that goes from Auto, Low (
), Low-
Medium speed (
), Medium speed ( ), Medium-High speed ( ), High speed
(
).
Auto
5) SWING key used to set swing angle.
6) I FEEL key to enable/disable the IFEEL mode.
7)
/ key to set HEALTH / AIR function for air cleaning / for air change.
8) SLEEP key to set/cancel the Sleep mode regardless of the operating mode of the
conditioner.
9) TEMP key, press it to show the set point temperature on the unit’s display.
10) CLOCK key is used to set the current time.
11) 12) TIMER selection buttons. Press it to set auto-off/auto-on timer.
13) TURBO key used to enable/disable the rapid cooling or heating mode.
14) LIGHT key used to turn on or off the unit’s display.
15) X-FAN key press it to begin/stop indoor fan which is used to dry the components.
ONOFF/
-+
MODE FAN
SWING IFEEL
SLEEP
TEMP
TIMER-ON
CLOCK
TIMER-OFF
TURBO LIGHT
/
X-FAN
F
C
：
HOU R
ONOF F
14
4
3
13
6
15
12
10
8
7
11
9
1
5
2
4.2. Name and functions of the display indicators
: AUTO mode indicator
: COOL mode indicator
: DRY mode indicator
: FAN mode indicator
: HEAT mode indicator
: SLEEP mode indicator
: CLOCK indicator
: TIMER ON-OFF mode indicator
: TEMP indicator
: BLOW mode indicator
: AIR CLEANER mode indicator.
: 8°C Heating function indicator
: AIR RENEWING mode indicator
: LIGHT mode indicator
: LOCK indicator
: Air deflector indicator
: TURBO mode indicator
: Signal sent confirmation LED
: IFEEL mode indicator
FAN
: Fan Speed indicator
: Temperature display indicator
DISPLAY