Need help?Do you have a question about the Tekno RC ET410.2 and is the answer not in the manual?
Welcome, build indicators, and required parts/tools list.
Assembling differentials, steering, bulkheads, and chassis components.
Building suspension arms, links, shocks, and final body/wing.
Installing motor, ESC, receiver, servo, and completing the build.
Adjusting ride height, camber, toe, and suspension parameters.
Optimizing steering EPA, D/R, Expo, and Servo Speed.
Procedures for maintaining bearings, shocks, and drivetrain.
Comprehensive part catalog and vehicle setup recording template.
General| Scale | 1/10 |
|---|---|
| Motor | Not included |
| Battery | Not included |
| ESC | Not included |
| Tire Type | Not included |
| Type | Electric Truggy |
| Drive System | 4WD |
| Chassis | 3mm Aluminum |
| Suspension | Independent |
| Shock Type | Big Bore Oil-filled |
| Body | Not included |
To Next Page
