Need help?Do you have a question about the Tekno RC NB48 2.1 and is the answer not in the manual?
Explains build indicators, YouTube resources, and lists needed parts and tools.
Details the parts and steps for assembling the center differential.
Details the parts and steps for assembling the front gearbox.
Details the parts and steps for assembling the rear gearbox.
Guides through the assembly of the rear end components.
Details the assembly of rear hubs and camber links.
Details the parts and steps for assembling the steering system.
Provides step-by-step instructions for assembling the front shocks.
Details the step-by-step assembly of the rear shocks.
Step-by-step guide for filling shocks using the emulsion method.
Step-by-step guide for filling shocks using the bladder method.
Guides through the installation of the mud guard and radio tray.
Details the assembly of the air filter and clutch components.
Details the installation of the fuel tank and volume compensator.
Guides through installing wing mounts and chassis braces.
Lists all parts included in the kit and optional parts.
Explains basic suspension setup parameters like ride height and camber.
Provides guidelines for regular vehicle maintenance.
Explains essential radio settings for optimal control.
General| Scale | 1/8 |
|---|---|
| Type | Buggy |
| Class | Competition |
| Power Source | Nitro |
| Drivetrain | 4WD |
| Width | 307 mm |
| Suspension | Independent |
| Tire Type | Off-road |
| Radio | Not Included |
| Servo | Not Included |
| Weight | 3, 400 g |
| Chassis | 7075 Aluminum |
| Drive System | Shaft |
| Differential | Sealed Oil-filled |
| Motor | Not included |
| ESC | Not included |
| Battery | Not included |
| Body | Polycarbonate |
| Engine | Not included |
To Next Page
