Need help?Do you have a question about the Tekno RC EB48 and is the answer not in the manual?
General| Scale | 1/8 |
|---|---|
| Drive | 4WD |
| ESC | Not included |
| Radio | Not included |
| Servo | Not included |
| Motor | Not included |
| Battery | Not included |
| Suspension | Independent |
| Tire Type | Not included |
| Chassis | 7075-T6 aluminum |
| Shock Type | Big bore threaded aluminum shocks |
Key safety precautions for operating the RC vehicle.
Identifies parts for center differential assembly step A-1.
Details the center differential assembly process, steps A-2, A-3, A-4.
Lists components for front/rear differential assembly, step B-1.
Details the differential assembly process, steps B-2, B-3, B-4.
Identifies components for the front gearbox assembly, step C-1.
Details the front gearbox assembly and gear mesh adjustment, steps C-2, C-3.
Lists components for the rear gearbox assembly, step D-1.
Details the rear gearbox assembly and gear mesh adjustment, steps D-2, D-3.
Details the assembly process for the wing mount, step E-2.
Lists components for the rear suspension assembly, step F-1.
Instructions for initial shock oil filling and bleeding, steps 1-3.
Adjusting rebound and installing the shock bladder, steps 4-6.
Aligning the servo arm for neutral position, step P-8.
To Next Page
