Tekno RC EB48 - Bag G: Rear Hub;CVA Assembly; Rear Hub;CVA Components; Rear Hub;CVA Assembly Steps

TKR5072
TKR5073
TKR5070
TKR5040
TKRBB13194
TKRBB08165
TKR5073
TKR5071
TKR1603
TKR5034
TKR5021TKR5021TKR5021
TKR1201
TKR1201
Hole "B" is the stock position
*Only use hole A in the arm with
hole A in the hub
*Only use hole B in the arm with
hole B in the hub
The outside hole oers greater stability and
is
recommended for bumpy open tracks.
Inside hole oers greater amount of steering
and is recommended for at technical tracks.
A B A B
Note: notch on pin
needs to line up
with set screw.
Note: TKR5040 hubs are
left/right interchangeable
TKR5071
M3x16.8mm Pin
x2
TKR5073
CV Joint Pin
x2
TKR1603
M5x4mm Set Screw
x2
TKR1201
M3 Locknut Black
x4
TKRBB13194
Ball Bearing (13x19x4)
x2
TKRBB08165
Ball Bearing (8x16x5)
x2
*TKR5071X
(Option)
Step
G-1
Step
G-2
Grease
Bag G
Rear Hub/CVA Assembly
10
Thread
Lock