Need help?Do you have a question about the Tekno RC SCT 410 2.0 and is the answer not in the manual?
General product information, build icons, and required tools.
Legal notices, safety warnings, and important disclaimers for safe operation.
Explains parts and provides step-by-step instructions for assembling the center differential.
Covers parts and assembly steps for both front and rear differentials.
Details the components and assembly process for the front gearbox.
Outlines the parts and assembly procedures for the rear gearbox.
Provides a comprehensive guide to assembling the rear end of the vehicle.
Covers the parts and assembly instructions for the rear hub components.
Details the parts and assembly procedures for the rear camber links.
Guides through the assembly of the front end of the RC vehicle.
Explains the parts and assembly for the front spindle and carrier.
Details the parts and assembly procedures for the front camber links.
Provides instructions for assembling the vehicle's steering system.
Covers the assembly steps for the front end of the vehicle.
Continues the assembly process for the front and rear sections of the car.
Details motor mount installation and gearing recommendations.
Explains ESC mounting options and electrical wiring guidance.
Covers the assembly of the battery tray and servo linkage system.
Details the installation of the center differential and rear end components.
Continues the assembly process for the rear end of the vehicle.
Provides a guide for assembling the front shock absorbers.
Details the assembly process for the rear shock absorbers.
Step-by-step instructions for filling and bleeding the shock absorbers with oil.
Covers the installation of body mounts and posts on the chassis.
Guides through the final assembly stages, including wheels and tires.
Explains how to adjust ride height, camber angle, and front toe for optimal handling.
Details adjustments for steering response and suspension travel characteristics.
Guidance on tuning differentials, camber links, and wheelbase for improved performance.
Information on selecting springs, sway bars, and pistons to tune chassis dynamics.
Covers regular maintenance for bearings, shocks, drive lines, and differentials.
Outlines the warranty policy, covered parts, and conditions for claims.
General| Type | Short Course Truck |
|---|---|
| Scale | 1/10 |
| Drive Type | 4WD |
| Suspension | Independent |
| Height | 180mm |
| Motor | Not included |
| ESC | Not included |
| Battery | Not included |
| Tire Type | Not included |
| Chassis | 3mm CNC machined aluminum |
| Length | 550mm |
| Body | Not included |
| Weight | Varies with components used |
To Next Page
