System Operating Instructions
LI380/LI380LED, LI386 Dome Zone/Light Operation
The LI38x-series dome/zone lamps provide for local or zone indication of call origin, priority and staff
presence. Dome lamp applications are local to a specific room and annunciate call information for that
room. Zone lamps are representative of a group (or zone) of stations and will annunciate the highest pri-
ority call from that group. These devices may serve for dome or zone operation (depending on the sta-
tion they are connected to). The LI386 is a stand-alone device that is not used with other stations and is
typically used for zone applications. It can, however, support bath and code inputs for local annun-
ciation. The LI386 is addressed in the same manner as patient and staff stations, and supports no voice
communication functions.
Lamp (Default) Indications:
High Priority (fast repeating flash):
Code Call Alternate flashing red and white
Fire Flashing red (supplementary signal only)
Emergency Flashing White
Stat Service Request Alternate flashing green and yellow
Medium Priority (slow repeating flash):
Monitor
Flashing red
Bath Flashing white
Bed Out Flashing white
Cord Out Flashing white
Priority Flashing white
Nurse Service Request Flashing green
Aid Service Request Flashing yellow
Low Priority (steady lamp):
Staff Steady white
Duty Steady white
Personal Attention Steady white
Routine Steady white
Nurse Present Steady green
Aide Present Steady yellow
System Status:
Comm. Fault No dome light indication
Code Fault No dome light indication
Lamp Fault No dome light indication
24|IL1057 Tek-CARE300III Installation Manual
Copyright
©
TekTone Sound and Signal Mfg., Inc. All Rights Reserved
To Next Page
Loading...
