General Safety Summary
General Safety Summary
Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it.
To avoid potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
While using this product, you m ay need to access other parts of a larger
system. Read the safety sections of the other com ponent manuals for
warnings and cautions related to operating the system.
To Avoid Fire or Person
al Injury
Use Proper Power Cord. Use only the power cord specified for this
product and certifie
d for the country of use.
Connect and Disconnect Properly. Do not connect or disconnect probes or
test leads while th
ey are connected to a voltage source.
Connect and Dis conn ect Properly. Connect the prob e output to th e
measurement ins
trument before connecting the probe to the circuit
under test. Connect the probe reference lead to the circuit under test
before connecting the probe input. Disconnect the probe input and t he
probe referen
ce lead from the circuit under test before disconnecting
the probe from the measurement instrument.
Ground the Pr
oduct.
This product is grounded through th e grounding
conductor of the power cord. To avoid electric shock, the grounding
conductor must be connected to earth ground. Before making
connectio
ns to the input or output terminals of the product, ensure that
the product is properly grounded.
Observe A
ll Terminal Ratings.
To avoid fire or shock hazard, observe all
ratings and markings on the product. Consult the product manual for
further ratings information before making con nections to the pro duct.
The inputs are not rated for connection to mains or Category II, III, or
IV circuits.
Connect the probe reference lead to earth ground only.
ii 1103 Power Supply Instruction Manual
To Next Page
Loading...
Need help?
General
