For the GPIB PRIMARY ADDRESS, enter the decimal equivalent of the GPIB ADDRESS switch settings on the 492P
rear panel.
The 492P response to a query is input with the INPUT statement:
Maintenance—492/492P Service Vol. 1 (SN B030000 & up)
3784-160
A string variable is formed by adding a dollar sign ($) to a variable name such as A or X1, making: A$ or X1$.
ADDR (instrument bus address) command:
—KADDr
HEX D IC IT 'H hEX DIGIT
hex d ic it H hex DIGIT
3784-165
HEX. DIGIT: A character in the sequence 0 through 9 and A through F representing a hexadecimal digit. The two
digits (in order) form a number to represent a location on the instrument bus. If a character is not a hexadecimal digit or
part of a pair of digits, it is not used in executing the ADDR command and an error is reported.
ADDR (instrument bus address) query:
A D Dr )
-- -
►{?)— ►
3784-166
Response to ADDR query:
K’ addr )- Κ ^ Μ 3 Η~ ηεχ digit H hex p ic r T H Ti^)-*-
3784-167
REV JUN 1983
4-43
To Next Page
Loading...
