Tektronix 6 Series Declassification And Security Instructions

Troubleshooting
How to sanitize a non-functional instrument
If your instrument is not functioning, proceed as follows to sanitize the instrument to return to Tektronix for repair:
1. Remove any attached USB flash drives or external USB drives from your oscilloscope. Refer to your company's internal
policies regarding handling or disposal of the flash drives.
2. Follow your company's internal policies regarding handling or disposal of the these boards.
3. Reassemble the oscilloscope and return it to Tektronix. New boards will be installed. The oscilloscope will be calibrated
and returned.
Note: Replacement of any missing or damaged hardware will be charged according to the rate at the time of
replacement.
Repair charges
Replacement of any missing hardware will be charged according to the rate at the time of replacement.
Troubleshooting
6 Series B Mixed Signal Oscilloscopes Declassification and Security Instructions 10

Tektronix 6 Series Specifications

General

Brand	Tektronix
Model	6 Series
Category	Test Equipment
Language	English