Tektronix AFG1000 Series - Erase Waveforms from Memory

Getting started
6
AFG1000 Series Quick Start User Manual
Erase waveforms from memory
You can erase all waveforms from the instrument internal memory using the
following procedure.
1. Push the Arb panel button.
2. Press Others.
3. Press File browse to
enter the file system.
4. Use the general purpose
knob to select INTER, and
then press Enter.
5. Press Secure.
6. Press Select to erase all
waveforms stored in
internal memory, or press
Cancel to cancel the
operation.