Installation Introductions
016-1674-50 Rackmount Kit
11
Installation into a Equipment Rack
This procedure provides instructions on how to install the adapter into an
equipment rack.
These procedures include two installation methods.
H Installing the adapted instrument into a equipment rack.
H Rear Panel Cabling.
1. Select appropriate mounting holes on the equipment rack frame.
2. Attach the bracket to the equipment rack with four screws.
NOTE. These screws are not included in the rackmount kit (016-1674-00). Use
appropriate screws for your equipment rack.
Screw
Screw
Frame Rack
Figure 8: Installation into the equipment rack
Installing into a
Equipment Rack
To Next Page
Loading...
