DMM912/914/9161–14
Setup buttons
SETUP. Push to display and scroll through a list of menu
prompts. Use these menus to adjust the meter operation or
sets values for various operations. Turning the meter off
does not affect saved setups.
. Scrolls left through the digits and polarity for selec-
tion.
. Scrolls right through the digits for selection.
+. Increases selected digit values or toggles default
settings.
–. Decreases selected digit values or toggles default
settings.
EXIT SETUP. Push to exit the setup mode, applying the
changes and saving them as new defaults. Turn the dial to
exit the setup mode, cancelling all changes.
To Next Page
Loading...
Need help?
General
