Need help?Do you have a question about the Tektronix DMM916 and is the answer not in the manual?
General| Max Voltage Measurement | 1000 V |
|---|---|
| Max Current Measurement | 10 A |
| Diode Test | Yes |
| Continuity Test | Yes |
| Operating Temperature | 0°C to 50°C |
| Frequency Range | 5Hz to 500kHz |
| Power Supply | 9V battery |
Explains symbols used on the product for safety identification.
Lists critical precautions for safe operation and preventing injury.
Description of the multimeter's input jacks for connections.
Details the rotary dial for selecting measurement functions.
Overview of buttons used with the dial for instrument functions.
Describes the LCD display and its dual numeric readout.
Procedures for safely disconnecting test leads from the meter and circuit.
Step-by-step guide for performing AC voltage measurements.
Step-by-step guide for performing DC voltage measurements.
Steps for measuring combined AC and DC voltage signals.
Guide for measuring signal frequency and duty factor.
Instructions for measuring resistance, including low voltage mode.
How to perform continuity tests using the meter's beeper.
Procedure for testing diodes with forward and reverse bias.
Steps for measuring capacitance values accurately.
Guide for measuring AC and DC current accurately.
Instructions for using the meter with optional temperature probes.
Explains the automatic power-off feature and its configuration.
Describes how to freeze readings and retain them for analysis.
Details the automatic freezing of stable readings.
Information on the meter's automatic fuse integrity check.
Warning and behavior of the probe input guard system.
Explains the beeper signals for operation, warnings, and errors.
How to set and use high/low limits for comparison.
Using the M/M/A button for min, max, average readings.
Overall technical characteristics and features of the multimeter.
Detailed accuracy, ranges, and bandwidth for various measurements.
Dimensions and weight of the multimeter.
Operating and storage conditions for temperature and humidity.
Lists safety, regulatory, and compliance standards met by the device.
To Next Page
