Tektronix DPO2000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Syntax
CURSor:VBArs:
VDELTa?
Related Commands
CURSor:HBArs:UNIts
Retu
rns
<NR3> indicates the horizontal difference between the two vertical bar cursors.
Examples
CURSOR:VBARS:VDELTA? might return CURSOR :VBARS:VDELTA 1.064E+0,
indicating that the vertical difference between the vertical bar cursors ticks is
1.064 units.
CURSor:XY:POLar:RADIUS:DELta? (Query O nly)
Returns the difference between the cursors X radius and the cursor Y radius (ΔY¸
ΔX). The ratio is calculated as (cursor 2 Y - cursor 1 Y) ÷ (cursor 2 X - cursor 1 X).
Group
Cursor
Syntax
CURSor:XY:POLar:RADIUS:DEL ta?
CURSor:XY:POLar:RADIUS:POSITION<x>? (Query Only)
Returns the polar radius for the specified cursor, where x can be either 1 or 2.
Group
Cursor
Syntax
CURSor:XY:POLar:RADIUS:POS ITION<x>?
CURSor:XY:POLar:RADIUS:UNIts? (Query Only)
Returns the polar radius units.
Group
Cursor
Syntax
CURSor:XY:POLar:RADIUS:UNI ts?
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-119

Tektronix DPO2000 Series Specifications

General

Brand	Tektronix
Model	DPO2000 Series
Category	Test Equipment
Language	English