Commands Listed in Alphabetical Order
MOREthan place
s a mark if the pulse width is more than the time set by the
SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth command.
EQUal places a mark if the pulse width is equal to the time set by the
SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth command within a
tolerance of ±5%.
UNEQual places a mark if the p ulse width is unequal to the time the time set by
the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth command within a
tolerance of ±5%.
SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth
Sets or returns the pulse width setting for a pulse width trigger search to determine
where to place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :PULSEWidth:WIDth <NR3>
SEARCH:SEARCH<x>:TRIGger:A :PULSEWidth:WIDth?
Arguments
<NR3> is the pulse width.
SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity
Sets or returns the polarity setting for a runt trigger search to determine where to
place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :RUNT:POLarity
{EITher|NEGative|POSitive}
SEARCH:SEARCH<x>:TRIGger:A :RUNT:POLarity?
Arguments
POSitive places a m ark when the rising edge crosses the low threshold and
the falling edge re-crosses the low threshold without either edge
ever crossing
the high threshold.
NEGative places a mark when the falling edge crosses the high threshold and
the rising edge re-crosses the high threshold without either edge ever crossing
the low threshold.
EITher places a mark on a runt of either polarity.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-275
To Next Page
Loading...
Need help?
General
