Tektronix DPO2012B Programmer's Manual

Commands Listed in Alphabetical Order
Examples
TRIGGER:EXTER
NAL:PROBE?
might return :TRIGGER:EXTERNAL:PROBE
1.0E1
for a 10X probe.
TRIGger:EXTernal:YUNIts? (Query Only)
Returns the external trigger vertical (Y) units value.
Group
Trigger
Syntax
TRIGger:EXTernal:YUNIts?
Examples
TRIGGER:EXTERNAL:YUNITS? might return TRIG GER:EXTERNAL:YUNITS
“V”
if the vertical unit is volts.
TRIGger:FREQuency? (Query Only)
Returns the available trigger frequency in hertz. If the trigger frequency is not
currently available, the IEEE Not A Number (NaN = 9.9100E+37) value is
returned. The maximum precision of the r eturned frequency is 6 digits.
Group
Trigger
Syntax
TRIGger:FREQuency?
TRIGger:STATE? (Query Only)
Returns the current state of the triggering system: A RMED, AUTO, READY,
SAVE
or TRIGGER.
Group
Trigger
Syntax
TRIGger:STATE?
Related Commands
TRIGger:A:MODe
Returns
ARMED indicates that the oscilloscope is acquiring pretrigger information.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-347

Tektronix DPO2012B Specifications

General

Brand	Tektronix
Model	DPO2012B
Category	Test Equipment
Language	English