Tektronix DPO2012B Programmer's Manual

Commands Listed in Alphabetical Order
Group
Trigger
Syntax
TRIGger:A:VIDeo{:SYNC|:FI ELD}
{ODD|EVEN|ALLFields|ALLLi nes|NUMERic}
TRIGger:A:VIDeo{:SYNC|:FI ELD}?
Arguments
ODD argument sets the oscilloscope to trigger on interlaced video odd fields.
EVEN argument sets the oscilloscope to trigger on interlaced video even fields.
ALLFields argument sets the oscilloscope to trigger on all fields.
ALLLines argument sets the oscilloscope to trigger on all video lines.
NUMERic argument sets the oscilloscope to trigger on the video signal line
specified by the TRIGger:A:VIDeo:LINE command.
Examples
TRIGGER:A:VIDEO:FIELD EVEN sets the A video trigger so that it will trigger
on even fields.
TRIGGER:A:VIDEO:FIELD? might return :TRIGGER:A:VIDE O:FIELD
ALLFIELDS
indicating that the A video will trigger on all video fields.
TRIGger:EXTernal? (Query Only)
Returns all external trigger parameters.
Group
Trigger
Syntax
TRIGger:EXTernal?
TRIGger:EXTernal:PRObe
Sets or retu
rns the attenuation factor value of the external probe connector.
Group
Trigger
Syntax
TRIGger:EXTernal:PRObe <NR3>
TRIGger:EXTernal:PRObe?
Arguments
<NR3> is the attenuation factor o f the probe.
2-346 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2012B Specifications

General

Brand	Tektronix
Model	DPO2012B
Category	Test Equipment
Language	English