Tektronix DPO2024 Programmer's Manual

Commands Listed in Alphabetical Order
Group
Vertical
Syntax
CH<x>:PRObe:GAIN <NR3>
CH<x>:PRObe:GAIN?
Related Commands
CH<x>:SCAle
Arguments
<NR3> is the probe gain. Allowed values depend on the specificprobe.
Examples
CH2:PROBE:GAIN? might return :CH2:P ROBE:GAIN 0.1000E+00 indicating
that the attached 10x probe delivers 1 V to the channel 2 BNC for every 10 V
applied to the probe input.
CH<x>:PRObe:ID? (Query Only)
Returns the type and serial number o f the probe attached to channel <x>, where x
i
s the channel number.
Group
Vertical
Syntax
CH<x>:PRObe:ID?
Examples
CH2:PROBE:ID? might return :CH2:PROBE:I D:TYPE "10X";SERNUMBER
"N/A"
indicating that a passive 10x probe of unknown serial number is attached
to channel 2.
CH<x>:PRObe:ID:SERnumber? (Query Only)
Returns the serial number of the probe attached to channel <x>, where x is the
channel number.
NOTE. For Level 0 and 1 probes, the serial number will be "".
Group
Vertical
Syntax
CH<x>:PRObe:ID:SERnumber?
2-106 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2024 Specifications

General

Brand	Tektronix
Model	DPO2024
Category	Test Equipment
Language	English