Commands Listed in Alphabetical Order
MEASUrement:
MEAS<x>:DELay? (Query Only)
Returns the delay measurement parameters for the measurement specified by
<x>, which ranges from 1 through 4.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:DELay ?
Examples
MEASUREMENT:MEAS1? might return
:MEASUREMENT:MEAS1:DELAY: DIRECTION FORWARDS;EDGE1 RISE;EDGE2
RISE
.
MEASUrement:MEAS<x>:DELay:DIRection
Sets or returns the starting point and direction that determines the delay "to" edge
when taking a delay measurement. Use the MEASUrement:MEAS<x>:SOURCE2
command to specify the waveform.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:DELay :DIRection {BACKWards|FOR Wards}
MEASUrement:MEAS<x>:DELay :DIRection?
Related Commands
MEASUrement:MEAS<x>:SOURCE2
Arguments
BACKWards means the search starts at the end of the waveform and
looks for the last rising or falling edge in the waveform. Use the
MEASUrement:MEAS<x>:DELay:EDGE<x> command to specify the slope
of the edge.
FORWards means the search starts at the beginning of the waveform
and looks for the first rising or falling edge in the waveform. Use the
MEASUrement:MEAS<x>:DELay:EDGE<x> command to specify the slope
of the edge.
Examples
MEASUREMENT:MEAS3:DELAY:D IRECTION BACKWARDS starts searching from
the end of the waveform record.
2-198 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
