Tektronix DPO5000 Series - Sending E-Mail on Trigger

Pinpoint trigge
rs
Sending E-Mail on Trigger
You must configure e-mail on event before performing the following procedure. (See page 85, Setting up E-Mail on Event.)
1. Select Trig > A Event (Main) Trigger
Setup....
2. Select the Mode tab.
3. Under E-mail on Trigger, click On, and
then click Setup. (See page 85, Setting
up E-Mail on Event.)
84 MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO /DP O5000 Series U ser Manual