Need help?Do you have a question about the Tektronix DPO72304DX and is the answer not in the manual?
General| Bandwidth | 23 GHz |
|---|---|
| Channels | 4 |
| Sample Rate | 100 GS/s (2 channels), 50 GS/s (4 channels) |
| Display Size | 12.1 inch |
| Display Type | LCD |
| Probe Interface | TekConnect |
| Operating Temperature | +40°C |
| Input Impedance | 50 Ω or 1 MΩ (selectable) |
| Rise Time | < 15 ps |
| Maximum Input Voltage | 50 Ω: 5 Vrms, 10 Vpeak |
Covers essential safety guidelines for product operation and user protection.
Guidelines for safe use of power cords, grounding, and disconnection to prevent hazards.
Instructions on operating conditions, covers, exposed circuitry, failures, and environmental factors.
Specific safety measures for qualified personnel performing service, including shock prevention and power disconnect.
Lists supported instrument models and outlines the key features and capabilities of the series.
Details environmental, power, dimension, and clearance requirements for instrument operation.
Procedures for powering the instrument on and off, including power supply requirements.
Procedure for restoring the instrument's operating system from the hard disk.
Procedure to run and verify the results of the instrument's internal diagnostic tests.
Introduces concepts and procedures for using the acquisition system, including signal path compensation.
Steps to connect and select analog input channels for signal acquisition.
Procedures for starting/stopping acquisitions and selecting horizontal modes.
Explains fundamental trigger concepts: events, modes, and holdoff.
Details various trigger types available and how to select them for signal capture.
Guides on taking automatic measurements, customizing them, and using histogram tools.
To Next Page
