Installation
Upgrading Firmware
To upgrade the firmware of the oscilloscope:
1. Open up a Web browser and go to
www.tektronix.com/software/downloads.
Proceed to the software finder. Download
the latest firmware for your oscilloscope on
your PC.
Unzip the files and copy the firmware.img
file into th
e root folder of a USB flash drive
or USB hard drive.
2. Power off y
our oscilloscope.
3. Insert the USB flash or hard drive into
the USB port on the front panel of your
oscil
loscope.
MDO3000 Series Oscilloscopes User Manual 23
To Next Page
