Need help?Do you have a question about the Tektronix MDO3000 Series and is the answer not in the manual?
General| Brand | Tektronix |
|---|---|
| Model | MDO3000 Series |
| Category | Test Equipment |
| Language | English |
Defines key terms like Clear, Erase, Sanitize, Scrub, and User Accessible used in the document.
Defines terms related to data types (User data, User settings) and modification methods (Directly, Indirectly).
Lists and describes volatile memory types like DDR3 and SDRAM, their function, and how to clear them.
Details nonvolatile memory types like Flash and EEPROM, their contents, and sanitization methods.
Explains USB host ports and USB device ports, their functions, and how to disable them.
Step-by-step instructions to disable the USB device port on the instrument for security.
Procedure to disable all I/O ports using the MDO3SEC option, enhancing security.
Guide to disable the LAN port and clear network configuration details like IP addresses.
Steps to re-enable the USB device port after it has been disabled.
Procedure to re-enable all I/O ports using the MDO3SEC option.
Instructions for re-enabling the LAN port and configuring its Ethernet settings.
Explains the purpose and benefits of the TekSecure function for erasing setup and waveform data.
Provides the detailed steps to execute the TekSecure function for erasing instrument memory.
Instructions for handling the acquisition board when the instrument is non-functional.
Guidance on handling USB flash drives associated with a non-functional instrument.
Information regarding charges for replacement of missing hardware.
To Next Page