Tektronix MDO3000 Series User Manual

Clear or sanitize a non-functional instrument
Use the following procedures to clear or sanitize a non-functional instrument.
Acquisition board
Only qualified personnel should perform service procedures. Read the General
Safety Summary and the Service Safety Summary in the MDO3000 Series
Service Manual (Tektronix part number, 077-0981-xx) before performing any
service procedures.
Remove the Acquisition board and return the product to Tektronix. A new
Acquisition board will be installed and the instrument will be repaired and
adjusted as necessary.
For removal instructions, refer to the MDO3000 Series Service Manual available
on the Tektronix Web site at www.tektronix.com/manuals.
After removing the Acquisition board, refer to your company's internal policies
regarding handling or disposal of the board.
USB flash drive
Remove the USB flash drive and return the instrument to Tektronix for repair.
After removing the USB flash drive, refer to your company's internal policies
regarding handling or disposal of the flash drive.
Charges
Replacement of any missing hardware will be charged according to the rate at the
time of replacement.
MDO3000 Series Declassification and Security Instructions 15

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English