Need help?Do you have a question about the Tektronix MDO4104 and is the answer not in the manual?
General| Brand | Tektronix |
|---|---|
| Model | MDO4104 |
| Category | Test Equipment |
| Language | English |
Details parameters for capturing analog signals, including input coupling, resistance, and capacitance.
Specifies horizontal and acquisition system parameters like sample rate, record length, and time base accuracy.
Outlines trigger capabilities for analog and digital signals, including bandwidth, sensitivity, and jitter.
Provides parameters for the RF channel, such as frequency range, resolution bandwidth, and noise levels.
Lists operating and non-operating conditions for temperature, humidity, and altitude.
Describes the physical dimensions, weight, and clearance requirements of the instrument.
Verifies oscilloscope functions and passes internal tests without external equipment or hookups.
Measures and records the input resistance of the oscilloscope channels across various settings.
Tests the DC balance of the oscilloscope channels under different bandwidth and impedance configurations.
Evaluates the accuracy of DC gain measurements across various vertical scales, bandwidths, and impedances.
Measures and verifies the analog bandwidth performance of the oscilloscope channels at specified frequencies.
Assesses the phase noise performance of the RF channel at specified offset frequencies from a CW signal.
Tests the uncertainty of level measurements at different reference levels and frequency spans.
To Next Page