Need help?Do you have a question about the Tektronix MDO4104C and is the answer not in the manual?
General| Bandwidth | 1 GHz |
|---|---|
| Channels | 4 |
| Sample Rate (analog) | 5 GS/s |
| Record Length (analog) | 20 Mpoints |
| Display | 10.4 inch |
| Vertical Resolution | 8 bits |
| Probe Interface | TekVPI |
| Operating Temperature | 0 °C to +50 °C |
| Form Factor | Benchtop |
| Display Type | Color TFT LCD |
| Maximum Input Voltage | 400 V (DC + AC peak) |
| Input Impedance | 50 Ω |
| Spectrum Analyzer Frequency Range | 9 kHz to 3 GHz |
Lists standards and guidelines for declassification and sanitization procedures.
Lists the Tektronix oscilloscopes and application modules included in this document.
Points to additional manuals and defines key terminology used in the document.
Defines key terms like data storage types, modification methods, accessibility, clearing, and sanitization.
Details volatile memory components, their functions, and clearing/sanitizing methods.
Details nonvolatile memory components, their functions, and clearing/sanitizing methods.
Lists nonvolatile memory types specific to application modules and their sanitization.
Describes devices used for exporting data, including USB host and device ports, and Ethernet.
Procedure to restore application modules to their default state via license transfer.
Explains what the TekSecure feature erases and its limitations.
Step-by-step guide on how to activate and use the TekSecure erase function.
Procedure to reset the instrument's Random Access Memory (RAM).
Instructions for overwriting data in the protected user data area using specific commands.
Steps to disable the LAN port and clear network configuration settings like IP addresses.
Instructions for disabling the USB device port and all I/O ports using MDO4SEC option.
To Next Page