Tektronix MDO4054-3 User Manual

Save and Recall I
nformation
USB
Device
Port
Connect to
Computer
5. Push Connect to PictBridge Printer.
Connect to
PictBridge
Printer
Disabled
(Off bus)
Printing Ov
er Ethernet
To set up the oscilloscope to print over Ethernet:
1. Connect an Ethernet cable to the rear-panel
Ethernet port.
2. Push Utility.
3. Push Utility Page.
Utility
Page
4. Turn multipurpose knob a and select Print
Setup.
Print
Setup
174 MDO4000 Series Oscilloscopes User Manual

Tektronix MDO4054-3 Specifications

General

Brand	Tektronix
Model	MDO4054-3
Category	Test Equipment
Language	English