Tektronix MDO4054-3 User Manual

Installation
10. Run your application software on your
computer.
Quick Tips
Your oscillos cope shipped with a CD that contains a variety of W indows-based software tools for efficient connectivity
between your oscilloscope and your computer. These include toolbars that speed connectivity with Microsoft Excel and
Word. There are also two standalone acquisition programs called NI LabVIEW SignalExpress™, Tektronix Edition and
Tektronix OpenChoice Desktop.
The rear-panel USB 2.0 device port is the correct USB port for computer connectivity. Use the rear- and front-panel USB
2.0 host ports to connect your oscilloscope to USB flash drives. Use the USB Device port to connect your oscilloscope
to a PC or a PictBridge printer.
USB Host port
USB Device port
Using the LXI Web Page and e*Scope
With e*Scope, you can access any Internet-connected M DO4000 Series oscilloscope from a web browser on your computer.
To set up e *Scope communications between your oscilloscope and a Web browser running on a remote computer:
1. Connec
t the oscilloscope to your computer
network with an appropriate Ethernet cable.
2. Push Utility.
26 MDO4000 Series Oscilloscopes User Manual

Tektronix MDO4054-3 Specifications

General

Brand	Tektronix
Model	MDO4054-3
Category	Test Equipment
Language	English