Tektronix MSO2014 Programmer's Manual

Command Groups
Table 2-15: Bus Commands (cont.)
Commands Description
SEARCH:SEARCH<x>:TRIGger:A:BUS?
Returns the serial search type
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:CONDition
Sets or returns the search condition for a LIN
search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:DATa:HIVALue
Sets or returns the binary data s tring
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:DATa:QUALifier
Sets or returns the L IN data qualifier
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:DATa:SIZe
Sets or returns the length of the data string
in bytes
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:DATa:VALue
Sets or returns the binary data string used
for a LIN search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:ERRTYPE
Sets or returns the error type used for a LIN
Search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:IDentifier:VALue
Sets or returns the binary address string
used for LIN search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:RS232C:CONDition
Sets or returns the trigger condition for a
RS232 trigger
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:RS232C:RX:DATa:SIZe
Sets or returns the length of the data string
for a RS232 RX trigger
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:RS232C:RX:DATa:VALue
Sets or returns the binary data string for a
RX RS232 trigger
TRIGger:A:BUS:B <x>:LIN:CONDition Sets or returns the trigger condition for LIN
TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue Sets or returns the binary data string to be
used for LIN trigger
TRIGger:A:BUS:B <x >:LIN:DATa:QUALifier Sets or returns the L IN data qualifier
TRIGger:A:BUS:B <x>:LIN:DATa:SIZe Sets or returns the length of the data string
in bytes to be used for LIN trigger
TRIGger:A:BUS:B<x>:LIN:DATa:VALue Sets or returns the binary data s tring
TRIGger:A:BUS:B<x>:LIN:ERRTYPE Sets or returns the error type
TRIGger:A:BUS:B <x>:LIN:IDentifier:VA Lue Sets or r eturns the binary address string
used for LIN trigger
TRIGger:A:BUS:B<x>:RS232C:RX:DATa:
SIZe
Sets or returns the length of the data string
for a RX RS232 trigger
TRIGger:A:BUS:B<x>:RS232C:RX:DATa:
VALue
Sets or returns the binary data string for a
RX RS232 trigger
TRIGger:A:BUS:B<x>:RS232C:TX:DATa:
SIZe
Sets or returns the length of the data string
to be used for a TX RS232 Trigger
TRIGger:A:BUS:B<x>:RS232C:TX:DATa:
VALue
Sets or returns the binary data string to be
used for a TX RS232 trigger
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-15

Tektronix MSO2014 Specifications

General

Brand	Tektronix
Model	MSO2014
Category	Test Equipment
Language	English