Tektronix MSO2014 Programmer's Manual

Commands Listed in Alphabetical Order
Syntax
WFMOutpre:BYT
_Or {LSB| MSB}
WFMOutpre:BYT_Or?
Related Commands
WFMOutpre:ENCdg, WFMOutpre:BYT_Nr
Arguments
LSB specifie
s that the least significant byte will be transmitted first.
MSB specifies that the most significant byte will be transmitted first.
Examples
WFMOUTPRE:BYT_OR MSB sets the most significant outgoing byte of waveform
data to be transmitted first.
WFMOUTPRE:BYT_OR? might return :WFMOUTP RE:BYT_OR LSB indicating that
the least significant data byte will be transmitted first.
WFMOutpre:COMPosition
Controls or indicates the type of data used by the CURVe? query.
Group
Waveform Transfer
Syntax
WFMOutpre:COMPosition
{COMPOSITE_YT|COMPOSITE_E NV|SINGULAR_YT}
WFMOutpre:COMPosition?
Arguments
COMPOSITE_YT uses the sample part of the composite waveform.
COMPOSITE_ENV uses the peak-detect part of the composite waveform.
SINGULAR_YT uses the sample part of the singular waveform.
Examples
WFMOUTPRE:COMPOSITION? might re
turn
:WFMOUTPRE:COMPOSITION
SINGULAR_YT
indicating that the singular data type is used by the CURVe?query.
WFMOUTPRE:COMPOSITIONCOMP OSITE_YT sets the data type used by the
CURVe?query.
WFMOutpre:ENCdg
Sets and queries the type of encoding for outgoing waveforms.
Group
Waveform Transfer
2-366 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix MSO2014 Specifications

General

Brand	Tektronix
Model	MSO2014
Category	Test Equipment
Language	English