Installation
3. Push Utility.
4. Push Utility Page.
Utility Page
5. Turn multipurpose knob a and select I/O.
Utility Page
I/O
USB
Computer
Ethernet
Network
Settings
GPIB
1
6. If a USB cable is connected between
the oscilloscope and your computer, the
oscilloscope au tomatically sets itself up for
you.
Check the USB on the lower-bezel menu to
be sure it is enabled. If it is not e nabled, push
USB and make an app ropriate select ion in the
side-bezel menu.
DPO2000 and MSO2000 Series Oscilloscopes User Man ual 41
To Next Page
Loading...
Need help?
General
