Locating Signals
Slow FF Data
Board label. SL OW_FF_D
Connector grid location. H5
Description. This is the 1.25 MHz data input signal to a slow flip-flop that is asynchronous to the clock input.
Slow FF Q Output
Board label. SL OW_FF_Q
Connector grid location. H5
Description. This is the Q ou tput signal of the slow flip-flop. This signal shows metasta ble behavior frequently.
Counter Clock
Board label. CNT_CLK
Connector grid location. B6
Description. This is the 1.25 MHz clock signal for the 7-bit Counter Output described next.
Demo 2 Board Instruction Manua l 121
To Next Page
Loading...
Need help?
General
