Get Acquainted with the Instrument
10. B1 or B2. Pushtodefine and display a
bus if you have the appropriate module
application keys. The DPO4AUTO module
supports CAN and LIN buses. The
DPO4AUTOMAX supports CAN, LIN
and FlexRay buses. The DPO4EMBD
module supports I
2
C and SPI. The
DPO4COMP module supports RS-232,
RS-422, RS-485, and UART b uses. The
DPO4AUDIO module supports I
2
S, Left
Justified (LJ), Right Justified (RJ), and
TDM buses.
Also, push the B1 or B2 button to display
or re move the corresponding bus from the
display.
On th e MSO40 00 Series, you can use the
B3 and B4 buttons to support up to four
different serial buses, and parallel buses.
11. R. P ush to manage reference waveforms,
including the display or removal o f each
reference w aveform from the display.
12. M. Pus h to manage the math waveform,
including the display or remo val of the
math waveform from the display.
MSO4000 and DPO4000 Series Oscilloscopes User Manual 59
To Next Page
Loading...
Need help?
General
