■
When doing substep 2.f, skip the subparts that turn on the Chx
Amplitude mean measurement until you check a new channel.
■
When selecting a new channel and before doing substep 2.e, touch
the Clear All button to remove the previous channel measurements.
j. Test all channels: Repeat substeps 2.a through 2.i for all four channels.
3. Disconnect the hookup: Disconnect the test hook up from the input connector
of the channel last tested.
Performance verification (MSO/DPO70000C, MSO/DPO70000DX, and DPO7000C series)
MSO70000C/DX, DPO70000C/DX, DPO7000C, MSO5000/B, DPO5000/B Series 237
To Next Page
Loading...
