Specifications
Figure 36
: Measuring 750A noncontinuous at 23 °C ambient temperature
At 23 deg
rees ambient temperature, 600 A can be measured continuously with
the TCP404XL probe.
Emissio
ns which exceed the levels required by this standard may occur when this
equipment is connected to a test object.
Safety Compliance Information
Table 13: Safety compliance information
Category Standards or description
EC Declaration of Conformity – Low
Vo ltage
1
Compliance was demonstrated to the following specifi cation as listed in the Official Journal
of the European Communities:
Low Voltage Directive 73/23/EEC, amended by 93/68/EEC.
EN 61010-1/A2:1995. Safety requirements for electrical equipment for measurement
control and laboratory use.
EN 61010-2-032:1995. Particular requirements for hand-held current clamps for electrical
measurement and test equipment.
U.S. Nationally Recognized Testing
Laboratory Listing
UL3111-1. Standard for electrical measuring and test equipment.
UL3111–2–032. Standard for hand-held current clamps for electrical measurement and test.
Canadian Certification CAN/CSA C 22.2 No. 1010.1. Safety requirements for electrical equipment for
measurement, control, and laboratory use.
CAN/CSA C22.2 No. 1010.2.032:1996. Particular requirements for hand-held probe
assemblies for electrical measurement and test equipment.
TCPA300/400 Amplifiers and TCP300/400 Series Current Probes User Manual 57
To Next Page
Loading...
Need help?
General
