TDS 200 Series Digital Oscilloscope Service Manual
2–1
Operating Information
TDS 200-Series Digital Oscilloscopes are two or four channel oscilloscopes in
small, lightweight, benchtop packages that you can use to take ground-referenced
measurements.
In addition to the list of general features, this chapter covers the following topics:
H How to install your product
H How to add extended functions
H How to perform a brief functional check
H How to compensate probes
H How to use the self calibration routine
H How to match your probe attenuation factor
For more detailed information about instrument operation, refer to your user
manual.
To Next Page
Loading...
Need help?
General
