Tektronix TDS 360 User Manual

II Descriotion
bigger source
3H1 or CH2
Ztemal
~xtemalll0
kigger source
:Hi or CH2
n ..+.nnAi.r A. C*nn:cnnr:r.-,.
her Level, DC Coupled
dge-Type Trigger, DC
( Sensitivity
?(3% of ISetting - Net Offset’1 + 0.2 div x
1 voltsldiv setting + Offset Accuracy)
f(6% of ISettingl * 20 mV)
?(6% of ISetting + 200 mV)
Sensitivity
TDS 340: 0.35 division from DC to 20 MHz,
increasing to 1 div at 100 MHz
SDS 360: 0.35 division from DC to 50 MHz,
increasing to 1 div at 200 MHz
1 TDS 380: 0.35 division from DC to 50 MHz.
increasing to 1 div at 400 MHz
TDS 340: 50 mV from DC to 20 MHz,
increasing to 150 mV at lC10 MHz
ixtemal
TDS
360: 50 mV from
DC ‘to 50 MHz.
increasing to 150 mV at 2C’O MHz
~increasingto5OOmVat4OOMHz
TDS 380: 50 mV from DC to 50 MHz.
.xtemal/l 0
TDS 340: 500 mV from DC: to,20 MHt,
increasing to 1.5 Vat 100 MHz
TDS 360: 500 mV from DC to 50 MHz,
increasing to 1.5 Vat 200 IMHz
TDS 380: 500 mV from DC to 50 MHz,
increasino to 5.0 Vat 400 MHz
MR *2% in parallel with 20 pF 22 pF
:300 V (DC or AC) CAT II; demte at 20 dB/decade above 100 kHz to 13 \I peak AC at
MHz and above
’
~~~“~~~;>~;;;,,~, (;
Net Offset: Offset- (Position x Volts/Div). Net Offset is the voltage level at the center of the A-D converter ‘dynamic
ir:‘::~.,,: ,’ ”
range. Offset Accuracy is the accuracy of this voltage level.
,‘+
/ ‘,;: F:::
Mle A-4: Power Requirements
,‘,ii!;re:! ;::‘,, Name
I Descriwtion
90 to 132 VACRM~, continuous range, for47 Hz through 440 Hz
range, for47 Hz through 63 Hz
power Cons”mptio”
1 G5 Watts (120 VA)
p,,
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Tektronix TDS 360 Specifications

General

Brand	Tektronix
Model	TDS 360
Category	Test Equipment
Language	English