Command Descriptions
2ā136
TDS Family Oscilloscope Programmer Manual
īīī
īīīīīīīī
īīīīīī!ī"
īīīīīī!,
īīī(%$!,
īīīīī,
ī
īīīīī)*-
īī*ī !ī
ī
īīī"
īīīī(
īīī&
īīī
īīīī)&)+
īīīī'ī#!
īīīī)()
īīīīīīīī
īīīīī!,
īīī
īīīīīī
īīīīīī
īīīīīīī'#
On monochrome instruments (TDS 4X0A, 5X0A & 6X0A series only), the
following formats are mapped to a monochrome near equivalent:
īīīīīīīī ! īīī
īīīīīīīī ! īīī
īīī ! īīī
īīīīīīīīī ! īīīīīīīī
For example: if īīīīīīīīī
īīīīīī īīīīīīīī and īīīīīīīīī
īīīīīīī are sent
to the oscilloscope, īīī is returned.
īīīīīīīīī
īīīīīī īīīī
sets the hardcopy output format to HPGL.
īīīīīīīīī
īīīīīīī
might return īīīīīīīīī as the final hardcopy output format.
Examples