Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–79
CURSOR:PAIRED:UNITS BASE
sets the units for the paired cursors to base.
CURSOR:PAIRED:UNITS?
returns IRE when the paired cursor units are IRE.
CURSor:PAIred:VDELTA (Query Only)
Queries the vbar (time) distance between paired cursors. It returns the absolute
value of the first cursor less the second cursor horizontal positions.
The position can appear in units of seconds, 1/seconds (hertz), or video line
numbers (with option 05). On the TDS 4XXA, position can also appear in units
of clocks or 1/clocks.
Cursor
CURSor:FUNCtion
CURSor:PAIred:VDELTA?
CURSor
:
PAIred :
?
VDELTA
CURSOR:PAIRED:VDELTA?
might return 1.064E+00, indicating that the time between the paired cursors is
1.064 seconds.
CURSor:VBArs
Positions the vertical bar cursors and the CURSor:VBArs? query returns the
current vertical bar cursor settings for horizontal position, delta, cursor selection,
and units.
The position can appear in units of seconds, 1/seconds (hertz), or video line
numbers (with option 05). On the TDS 4XXA, position can also appear in units
of clocks or 1/clocks.
Cursor
Examples
Group
Related Commands
Syntax
Examples
Group
To Next Page
Loading...
Need help?
General
