Tektronix TDS 500B

TDS 500B, TDS 600B & TDS 700A Performance Verification and Specifications
vii
Preface
This is the Performance Verification and Specifications for the TDS 500B,
TDS 600B, and TDS 700A Oscilloscopes. It contains procedures suitable for
determining if each instrument functions, was adjusted properly, and meets the
performance characteristics as warranted. The following models are covered:
TDS 500B: TDS 520B and TDS 540B
TDS 600B: TDS 620B, TDS 644B, TDS 680B, and TDS 684B
TDS 700B: TDS 724A, TDS 754A, TDS 782A, and TDS 784A
This document also contains the technical specifications for these oscilloscopes.
Related Manuals
The following documents are related to the use or service of the digitizing
oscilloscope:
H The TDS 500B, 600B & 700A User Manual (Tektronix part number
070-9719-XX).
H The TDS Family Programmer Manual (Tektronix part number
070-9556-XX) describes using a computer to control the digitizing oscillo-
scope through the GPIB interface.
H The TDS 500B, 600B & 700A Reference (Tektronix part number
070-9382-XX) gives you a quick overview of how to operate your digitizing
oscilloscope.
H The TDS 500B, 600B & 700A Service Manual (Tektronix part number
070-9721-XX) provides information for maintaining and servicing the
digitizing oscilloscope to the module level.