Appendix A: Options and Accessories
TDS 500C, TDS 600B, & TDS 700C User Manual
A–5
The following optional accessory probes are recommended for use with your
oscilloscope:
P6701B Optical-to-Electrical Analog Converter: 500 to 950 nm (DC to 1 GHz, 1 V/mW)
P6703B Optical-to-Electrical Analog Converter: 1100 to 1700 nm (DC to 1 GHz, 1 V/mW)
P6723 Optical Logic Probe: 1310 to 1550 nm (20 to 650 Mb/s, –8 to –28 dBm
AFTDS Differential Signal Adapter
AMT75 75 W to 50 W Adapter
P6243 Active, high speed digital voltage probe. FET. DC to 1.0 GHz
P6245 Active, high speed digital voltage probe. FET. DC to 1.5 GHz
P6246 Active, high bandwidth differential probe. FET. DC to 400 MHz
P6247 Active, high bandwidth differential probe. FET. DC to 1 GHz
P6101B 1X, 15 MHz, Passive probe
P6156 10X, 3.5 GHz, Passive, low capacitance, (low impedance Z
O
) probe.
Provides 100X, when ordered as P6156 Option 25
P6139A 10X, 500 MHz Passive probe
P6217 Active, high speed digital voltage probe. FET. DC to 4 GHz. DC
offset
P6204 Active, high speed digital voltage probe. FET. DC to 1 GHz. DC
offset
P6563A Passive, SMD probe, 20X, 500 MHz
Accessory Probes
To Next Page
Loading...
Need help?
General
