Command Descriptions
2–292
TDS Family Oscilloscope Programmer Manual
WFMPre:ENCdg
Sets or queries the type of encoding for waveform data transferred with the
CURVe command.
Waveform
DATa:ENCdg, WFMPre:BYT_Or, WFMPre:BN_Fmt
! " #
specifies ASCII curve data.
specifies binary curve data.
specifies that the waveform data is in ASCII format.
might return , indicating that the waveform data is in binary format.
WFMPre:PT_Fmt (No Query Form)
Selects the point format of the waveform data for the first ordered waveform as
specified by the DATa:SOUrce command.
Waveform
! "#
Group
Related Commands
Syntax
Arguments
Examples
Group
Syntax
To Next Page
Loading...
Need help?
General
