Command Descriptions
2–58
TDS Family Oscilloscope Programmer Manual
!
"
#
! is the menu button label and can include any of the characters shown
in the TDS Character Chart in Appendix A. The maximum length of the label is
1000 characters. The label is displayed in the area to the left of the specified side
menu button. Refer to the APPMenu:LABel:BOTTOM<x> command on page
2–57 for more information on defining menu labels.
The label area is 72 pixels high and 112 pixels wide. The length of the label that
fits in the label area depends on the contents of the label, because the width of
characters varies. The label area is about 12 characters wide and 4 lines high. For
a complete list of character widths in pixels, see Table A–1 on page A–1.
$
displays the label “TEST ON” next to the top side menu button.
APPMenu:TITLe
Sets or queries the user-defined application menu title. The title is displayed
above the side menu.
Application Menu
APPMenu, APPMenu:LABel
" !
"
!
"
! is the side menu title and can include any of the characters shown in
the TDS Character Chart in Appendix A. The maximum length of the title is
1000 characters. The APPMenu:LABel:BOTTOM<x> command on page 2–57
provides information on defining menu labels.
The label area is 40 pixels high and 112 pixels wide. The length of the label that
fits in the label area depends on the contents of the label, because the width of
Arguments
Examples
Group
Related Commands
Syntax
Arguments
To Next Page
Loading...
Need help?
General
