Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–147
HORIZONTAL:DELAY:TIME:TRIGAFTER?
might return 1.000E-3, indicating that the delay time is 1 ms.
HORizontal:FASTframe:COUNt
TDS 5XXA & 7XXA Only
Sets or queries FastFrame frame count. This is equivalent to setting FastFrame
Setup in the Horizontal menu and the Frame Count menu item in the side
menu. FastFrame, also known as memory segmentation, captures a series of
triggered acquisitions with minimal, intervening, time.
Horizontal
HORizontal:FASTframe:COUNt <NR1>
HORizontal:FASTframe:COUNt?
::
FASTframe
HORizontal
COUNt
?
<Space> <NR1>
<NR1> indicates the number of frames to acquire.
HORIZONTAL:FASTFRAME:COUNT 2
Sets up FastFrame mode to acquire two frames (segments) of data.
HORizontal:FASTframe:LENgth
TDS 5XXA & 7XXA Only
Setup length of each FastFrame frame. This is equivalent to setting FastFrame
Setup in the Horizontal menu and the Frame Length menu item in the side
menu. FastFrame, also known as memory segmentation, lets users capture a
series of triggered acquisitions with minimal, intervening, time between them.
Horizontal
HORizontal:FASTframe:LENgth <NR1>
HORizontal:FASTframe:LENgth?
Group
Syntax
Arguments
Examples
Group
Syntax
To Next Page
Loading...
Need help?
General
