Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–189
"#
&
$
MEASUrement:METHod
Sets or queries the method used to calculate the 0% and 100% reference level.
This is equivalent to setting the High-Low Setup in the Measure menu.
Measurement
"# ' # " ( & )
"#
"#
!
&
# "
# " sets the high and low waveform levels statistically using a histogram
algorithm.
& sets the high and low waveform levels to MAX and MIN, respectively.
specifies that the high and low reference levels are set statistically.
returns when the reference levels are set to MIN and MAX.
MEASUrement:REFLevel? (Query Only)
Returns the reference levels.
Measurement
"#%
Returns
Group
Syntax
Arguments
Examples
Group
Syntax
To Next Page
Loading...
Need help?
General
