Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–227
sets the delay time to 4 ms.
TRIGger:DELay:TYPe
Sets or queries the type of delayed trigger.
Trigger
is a normal trigger. A trigger event occurs when a signal passes through a
specified voltage level in a specified direction. Use the TRIGger:DELay:LEVel
and TRIGger:DELay:EDGE:SLOpe commands to set the voltage level and
direction respectively.
always returns as the type of delayed trigger.
TRIGger:MAIn
Sets the main trigger level and returns the current main trigger parameters.
Trigger
Examples
Group
Syntax
Arguments
Examples
Group
Syntax
To Next Page
Loading...
Need help?
General
