TDS 500D, TDS 600B, & TDS 700D User Manual
F–1
Appendix F: Programmer Disk
The TDS Family Programmer disk is a Microsoft Windows help file that covers
operating your oscilloscope using the General Purpose Interface Bus (GPIB)
(optional on some oscilloscopes). The disk also includes some example
programs.
The program runs on a PC-compatible system with Microsoft Windows or
Windows 95. (See Figure F–1).
PC Compatible with
Microsoft Windows
TDS Family
Programmer
Figure F–1: Equipment Needed to Run the Example Programs
Loading the Programs
For instructions on installing the programmer manual and the other software on
the TDS Family Programmer Manual disk, read the readme file on the disk.
Running the Help Program
To run the programmer manual help file using Windows 3.1, perform the
following:
1. Double click on the TDS Family Programmer program group.
2. Double click on the TDS Family Programmer icon.
If you have not created a program group or a Windows 95 shortcut, use the File
Manager (Windows 3.1) or Explorer (Windows 95) to select and run the
tds–pgm.hlp program.
To Next Page
Loading...
Need help?
General
